Leading High-end One-stop Woven Fabrics Manufacturer
Language:
Fabric Knowledge
- Common Woven Fabric Defects and the 4-Point System: How to Grade Polyester and NylonOct 25,2026How to classify visible defects on woven polyester and nylon: yarn-direction faults, holes, stains and shade faults, plus the 4-point grading system, penalty rules, the points-per-100-square-yards calculation, and how to write an acceptance clause that survives a dispute.
- Peach, Sand Wash, Calender or Coating: Choosing a Hand-Feel Finish for Woven Polyester and NylonOct 23,2026How four finishing routes change the hand of woven polyester and nylon: peach sanding, sand wash, calender and Schreiner, and coating. What each one buys, what it costs in strength, shrinkage, permeability and fastness, and how to write a finish into a specification against a physical standard.
- How Polyester Woven Fabric Is Dyed: Pretreatment, HT Exhaust, Reduction Clearing and Heat SettingOct 21,2026A technical guide to dyeing woven polyester for apparel: why disperse dyes need 130C HT exhaust, the five stages from pretreatment to heat setting, what reduction clearing protects, where side-centre and lot-to-lot shade variation come from, and five practices for buying colour that matches.
- Recycled Polyester and Recycled Nylon in Woven Fabric: Certification Routes, Cost and SpecificationOct 19,2026A sourcing guide to recycled polyester and recycled nylon for woven apparel programs: why the two feedstock chains are not equivalent, what scope and transaction certificates actually prove, why full recycled content is often the wrong target, the four effects that show up at sampling, where the premium comes from, and the six documents to request before ordering.
- Fabric Weight (GSM) in Woven Polyester and Nylon: How to Specify It and Match It to End UseOct 19,2026A technical guide to fabric weight in woven polyester and nylon: what gsm measures and what it does not, converting gsm to oz/yd2, the four variables that produce weight with a worked pongee calculation, weight bands by end use, where the number misleads, what finishing adds and removes, and the five fields to put in a tech pack.
- Nylon Ripstop for Outdoor Programs: Denier, Grid Spacing, Tear Strength and Finish ChoicesOct 16,2026A construction guide to nylon ripstop for lightweight outdoor programs: how reinforcement yarn ratio and grid spacing arrest a tear, how to read ground denier and filament count, why nylon and polyester ripstop behave differently, how tear strength is measured and misread, and how repellent, calender, coating and downproof finishes change the garment.
- Satin, Charmeuse, Twill and Crepe: Choosing a Polyester Woven Weave for Dresses and WomenswearOct 14,2026A construction guide to the four polyester woven weaves that carry most womenswear programs: how float length in satin, charmeuse, twill and crepe sets lustre, drape, snag resistance, seam stability and print detail, which weave suits dresses, skirts, trousers and linings, and how to write a construction specification that survives the sampling round.
- Digital vs Screen vs Sublimation Printing on Polyester Woven FabricOct 12,2026Digital, rotary screen, flatbed screen and transfer/sublimation printing compared for polyester woven apparel: order-size thresholds, colour-count ceilings, design-fit, base fabric requirements, and the quality gates to set before bulk.
- How to Read a Fabric Test Report: Colour Fastness, Shrinkage, Abrasion and Water ResistanceOct 12,2026A buyer's guide to reading woven polyester and nylon test reports: colour fastness (washing, rubbing, light, perspiration), shrinkage and dimensional stability, Martindale abrasion and pilling, hydrostatic head and spray rating, how AATCC, ISO and ASTM methods differ, and how to write an enforceable specification.
- Polyester vs Nylon: Which Woven Fabric Is Right for Your Program?Oct 9,2026A property-by-property comparison of polyester and nylon woven fabrics for apparel: strength and abrasion, UV stability, moisture regain, dye chemistry, hand, cost, and the five questions that settle the fiber choice.
- Mechanical Stretch vs Spandex Stretch in Woven Fabrics: A Practical ComparisonSep 18,2026In woven fabric sourcing, 'stretch' gets used loosely. Mechanical stretch uses engineered yarn or weave geometry with no spandex in the fabric. Spandex stretch uses elastane in the warp and/or weft, with stronger 2-way or 4-way behavior. This guide compares the two paths on stretch direction, magnitude, recovery, heat-setting tolerance, dye compatibility, and cost, and gives a 5-question decision checklist for the next garment spec on polyester or nylon wovens.
- Is 95% Polyester 5% Spandex Stretchy? What 5% Spandex Actually DoesAug 28,2026Yes — a 95/5 poly-spandex woven gives comfort stretch, not compression: 2-way (weft) give, light shaping, and recovery from fresh greige plus two-stage heat-setting. When to choose a higher spandex share instead.
Blog group
Are you looking for a reliable manufacturer of garment woven fabrics?
We can quickly provide customers with market analysis, technical support and customized services.Subscribe to Get Latest Updates
Contact Person
Please send your message to us
Join us now and get free samples of SixDragon
- *Name
- *Phone
- *Title
- *Content














